Quatrefoil Lamp
Jazz up a simple lamp with Spray Paint and a bit of masking.
- 1
- 2
- 3
- 4
- 5
3 hours plus drying time
- Krylon® ColorMaster™ Primer - White
- Krylon® ColorMaster™
- Dover White
- Pebble
- Brushed Metallic - Champagne Nouveau
- Table lamp with shade
- Adhesive backed vinyl for quatrefoil masks
- Craft scissors
- Masking tape and paper
- Quatrefoil pattern, and/or personal die-cut machine
- Prepare lamp base by masking off all electrical elements with tape and paper.
- Spray paint lamp base with Krylon® ColorMaster™ Primer: White; allow to dry. Remove all masking.
- Spray paint lamp base with Krylon® ColorMaster™ Dover White.
- With masking paper and tape, completely cover the outside of lamp shade.
- Apply a thin coat of spray paint in a sweeping motion from side to side.
- Allow surface to dry for 30 seconds.
- Apply multiple thin coats of until surface is completely covered.
- Remove tape immediately after applying spray paint.
- Fusion dries in 15 minutes or less and can be handled in about 1 hour.
- Fusion must cure for a full 7 days to become fully chip and scratch resistant.
Quatrefoil Lamp was designed by Roxi Phillips.
Inspire your home décor by viewing more Home Décor spray paint projects from Krylon.